On this page
- Quick Answer
- Start With Your Water, Not With a Product
- The Certification Map: What 42, 53, 58, and 401 Actually Mean
- How to Check a Certification Before You Trust It
- Pitcher Filters: The Easy Starting Point
- Faucet-Mounted Filters: Filtered Water on Tap
- Under-Sink Filters: The Workhorse of the Kitchen
- Whole-House Filters: Every Tap, One Decision
- PFAS: The Contaminant That Changed the Conversation
- Choosing in Five Steps
- Frequently Asked Questions
- Sources
Quick Answer
No home filter removes everything, and the number on the box matters more than the brand name. Start with what is actually in your water, then match the problem to a filter whose certification names that exact contaminant. A pitcher is usually enough if all you dislike is the taste of chlorine. A filter certified to NSF/ANSI 53 or 58 is the place to look for a named health concern such as lead or PFAS. Reverse osmosis is the broadest option, but it uses more water and strips out minerals too. Read your water quality report first — it is free and arrives every year.
Start With Your Water, Not With a Product
If your home is on a public water system, your utility must send you a Consumer Confidence Report (CCR), also called an annual drinking water quality report. These reports must be sent by your water supplier each year by July 1, and they list the regulated contaminants found in your local drinking water, the source of your water, and any violations of EPA health standards. If you never received yours, call your local water supplier or use the EPA’s CCR search tool; the EPA’s Safe Drinking Water Hotline is 1-800-426-4791.
If the report is clean, the CDC’s advice is blunt — if your tap water does not contain harmful germs or chemicals, you may not need a filter at all. On a private well or rainwater system, there is no utility report. The CDC recommends testing at least once each year, and again if you notice changes in color, taste, or smell.
One warning that saves a lot of people a lot of money: taste, smell, and appearance are not reliable indicators of water safety. Harmful germs and chemicals often do not change the look, taste, or smell of water, while harmless substances — sulfur is a common one — can make water taste or smell bad.
The Certification Map: What 42, 53, 58, and 401 Actually Mean
In the United States, no federal regulations exist for residential water treatment filters, purifiers, and reverse osmosis systems. Instead, voluntary national standards and NSF protocols set minimum requirements for these products. The numbers in the standard names reflect the order in which each standard was developed — they are not a ranking or a rating system.
| Standard | What it certifies |
|---|---|
| NSF/ANSI 42 | Aesthetic effects: chlorine, taste, odor |
| NSF/ANSI 53 | Health effects: a contaminant with a health effect |
| NSF/ANSI 58 | Reverse osmosis systems |
| NSF/ANSI 401 | Emerging contaminants: unregulated trace chemicals |
NSF/ANSI 42 — aesthetic effects. Filters certified to this standard are certified to reduce aesthetic impurities such as chlorine and taste and odor, in point-of-use systems such as pitchers and under-sink units as well as point-of-entry (whole-house) systems. The CDC puts it simply: filters certified to NSF Standard 42 will improve the taste and smell of your water. What 42 does not do is verify any health-related contaminant reduction.
NSF/ANSI 53 — health effects. Filters certified to this standard are certified to reduce a contaminant with a health effect, with health effects set in the standard as regulated by the EPA and Health Canada. The CDC lists Standard 53 for cyst reduction: a filter certified to NSF 53 or 58 for cyst reduction can remove parasites such as Giardia and Cryptosporidium. For PFAS, the EPA’s guidance tells you to check the packaging for certification to NSF/ANSI 53 or NSF/ANSI 58 for PFAS reduction.
NSF/ANSI 58 — reverse osmosis systems. This standard covers complete reverse osmosis systems, which use reverse pressure to force water through a semi-permeable membrane, usually with additional filters on either side of the membrane. These systems reduce contaminants regulated by Health Canada and the EPA. Note the word “systems”: 58 certifies the whole RO unit, not a single cartridge.
NSF/ANSI 401 — emerging contaminants. These systems have been verified to reduce one or more of 15 emerging contaminants — pharmaceuticals or chemicals not yet regulated by the EPA or Health Canada. Think of 401 as an extra layer on top of 53, not a substitute. PFAS claims belong under 53 or 58.
NSF states the key caution: certification to a standard does not mean a filter will reduce all possible contaminants. Verify that the filter is certified for the contaminants of most concern to you or your family. A product certified to 53 for cysts is not automatically certified for lead; a product certified to 42 for chlorine taste is not certified for anything health-related at all.
How to Check a Certification Before You Trust It
A logo on a box is a claim. A listing in a certifier’s database is the proof. The EPA’s PFAS fact sheet recommends the same habit: first check the product packaging for certification to NSF/ANSI 53 or NSF/ANSI 58 for PFAS reduction, and if in doubt, check the certification body’s product directory.
Match three things every time: the exact model number (certification is model-specific); the standard number — the number alone is not the claim; and the named contaminant in the listing — lead, PFOA, PFOS, or cysts — with the capacity the claim was tested to.
Look it up in the NSF drinking water treatment units directory at https://info.nsf.org/Certified/DWTU/ — the CDC also points readers to the NSF database to see what a specific product is certified to remove — or the WQA product finder at https://find.wqa.org/find-products#/. The EPA also names CSA Group, IAPMO R&T, NSF, UL, and WQA as ANSI-accredited certifiers for PFAS reduction. “Tested to NSF standards” and “designed to meet NSF 53” are not certifications.
Pitcher Filters: The Easy Starting Point
A pitcher filter is the lowest-commitment way to filter water at home: no installation, no plumber, no permanent change to your kitchen. Most pitcher filters — and filters built into refrigerators — use activated carbon, and their main purpose is to improve the taste and smell of the water rather than its safety. If your CCR is clean and your only complaint is that the water tastes of chlorine, a pitcher certified to NSF/ANSI 42 does exactly what you need.
What a pitcher usually cannot do matters just as much. Most home water filters, like pitcher or fridge filters, are not designed to remove germs from your water. They typically use a carbon filter to make water taste better or to remove heavy metals like lead — but whether a given pitcher removes lead depends on that specific model’s certification, not on the fact that it is a pitcher. The category does not guarantee the claim; the listing does. Change cartridges on schedule — the EPA warns that not replacing a filter by the manufacturer’s recommended schedule can increase your risk of exposure to PFAS.
Faucet-Mounted Filters: Filtered Water on Tap
A faucet-mounted filter screws onto your kitchen tap and filters water as it comes out, usually with a switch that lets you bypass the filter for washing dishes. Like pitchers, most faucet filters are carbon-based: a basic model certified to NSF/ANSI 42 will improve taste and smell, while a model certified to 53 for specific contaminants can do more — but only for the contaminants named in its listing.
The trade-offs are about the kitchen rather than the chemistry. Flow can slow down when the filter is engaged, and it may not fit every faucet shape — check the manufacturer’s specifications before you buy. On the plus side, you get filtered water without lifting a jug, and changing the cartridge is usually a twist-off job. The CDC’s maintenance advice applies here as to every filter type: change filters according to the manufacturer’s recommendations, wear gloves while changing them, and wash your hands afterward.
Under-Sink Filters: The Workhorse of the Kitchen
Under-sink systems sit out of sight and hold larger cartridges than a pitcher or faucet unit — which usually means longer service life between changes. Two quite different things hide under the label “under-sink filter.”
Carbon under-sink filters. These are bigger, longer-lasting versions of the faucet filter: activated carbon doing the work, certified to 42 for taste and odor, and to 53 when the manufacturer has had the unit tested for specific health-related contaminants. The listing for the exact model is the only place that settles which contaminants are covered.
Under-sink reverse osmosis (RO) systems. The broadest filter in this guide, and the one with the most trade-offs. Reverse osmosis uses pressure to force water through a semi-permeable membrane with a pore size of about 0.0001 micron. The CDC says RO systems remove parasites, bacteria, and viruses, and remove some chemicals including lead, copper, chromium, chloride, and sodium. They may also reduce arsenic, fluoride, radium, sulfate, calcium, magnesium, potassium, nitrate, and phosphorous, though the CDC cautions you to check the system’s label for the specific chemicals it removes. The EPA adds that point-of-use RO systems can potentially remove lead, volatile organic compounds (VOCs), PFAS, arsenic, bacteria, and viruses.
That breadth comes with three honest costs. First, water waste: a typical point-of-use RO system will generate five gallons or more of reject water for every gallon of treated water produced, and some inefficient units generate up to 10 gallons per gallon treated. Systems that earn the EPA’s WaterSense label must demonstrate that they send just 2.3 gallons or less down the drain for every gallon of treated water. Second, speed: RO is slow, which is why most under-sink systems include a storage tank — and the tank takes up cabinet space. Third, minerals: because RO may reduce calcium, magnesium, and potassium, the water that comes out is very low in dissolved minerals. Whether that matters for your health is a question this article does not settle. RO also removes fluoride, which prevents cavities, and chlorine, which kills germs — the CDC notes that filters remove beneficial chemicals as well as harmful ones.
If your water report names a problem carbon alone cannot solve — nitrate, arsenic, or high dissolved solids — RO is usually the system a water professional will suggest. But the EPA’s WaterSense guidance is candid that RO is not for every home: in some cases, other treatment methods that use little or no water, such as filtration, are sufficient to meet consumer treatment needs. Do not buy the broadest system by default; buy the one that matches the problem you actually have.
Whole-House Filters: Every Tap, One Decision
A whole-house filter, also called a point-of-entry filter, filters water as it comes into your home, so all your water — from every tap — gets filtered. The CDC suggests considering one if you need to remove a harmful substance from all your water, such as certain volatile organic chemicals — including the water you bathe and clean with, not just the water you drink. NSF/ANSI 42 explicitly covers point-of-entry systems for aesthetic effects.
Whole-house systems are usually built around large carbon tanks, sometimes with a sediment pre-filter to catch sand and rust first. They are good at the things carbon is good at — chlorine taste and odor across the whole house, and, when certified to 53, specific health-related contaminants. What they generally do not do is remove dissolved solids, nitrate, or fluoride; that is RO territory, and RO at whole-house scale is a different, much larger investment.
One CDC caution: if a whole-home filter removes chlorine or other disinfectants, more germs may grow in your plumbing. Make this decision with your water report in hand, ideally with a plumber or water professional who knows your local water.
PFAS: The Contaminant That Changed the Conversation
PFAS — per- and polyfluoroalkyl substances — are a category of chemicals used in industry and consumer products since the 1940s, valued because they repel oil and water and resist heat. They show up in nonstick cookware, food packaging, waterproof clothing, stain-resistant furniture, and firefighting foam, and PFAS in drinking water can be a significant portion of a person’s total PFAS exposure. Exposure to PFAS may lead to health problems, so reducing exposure lowers the risk of those health problems.
In April 2024, the EPA announced the final National Primary Drinking Water Regulation for six PFAS — the first legally enforceable federal limits for PFAS in drinking water. The enforceable limits, called Maximum Contaminant Levels (MCLs), are 4.0 parts per trillion (ppt) for PFOA and also 4.0 ppt for PFOS, with a health-based, non-enforceable goal of zero for both. The rule also set 10 ppt limits for PFHxS, PFNA, and HFPO-DA (GenX chemicals), and a Hazard Index of 1 for mixtures of those compounds with PFBS. Public water systems must complete initial monitoring by 2027 and have five years — by 2029 — to implement solutions if their water exceeds the limits.
That timeline is still moving. In May 2026 the EPA proposed keeping the PFOA/PFOS limits with an optional extension to 2031, and rescinding the limits for PFHxS, PFNA, HFPO-DA, and the Hazard Index mixture. Those are proposals, not final rules, and the 2024 limits remain the enforceable standard while they are pending.
What does this mean for your kitchen? If PFAS are in your drinking water, a home filter could reduce them — but not all filters address PFAS, so get one certified to remove or reduce PFAS in drinking water. The filter types the EPA names as effective at reducing PFAS are granular activated carbon (GAC), reverse osmosis systems, and ion exchange resins. As of April 2024, filter certifications focused on removing PFOA and PFOS specifically. The EPA also states plainly that the certification standards for PFAS filters as of April 2024 do not yet indicate that a filter will remove PFAS down to the levels EPA has now set as a drinking water standard. Reducing PFAS levels is still an effective way to limit exposure in the meantime.
Reading a PFAS label is a lot like reading a cosmetics label — the claims that matter are the specific, certified ones, not the reassuring words around them. Our site’s guide to FDA cosmetics safety makes the same point for a different shelf: look past the marketing language and check what has actually been verified. FDA cosmetics safety If a filter box says “reduces PFAS” but the listing names no compound and no standard, treat the claim as decoration.
Choosing in Five Steps
- Read your CCR (or test your well water) and write down the contaminants that actually show up.
- Decide how much water needs filtering. Drinking and cooking water only points to a point-of-use filter — pitcher, faucet, or under-sink. Every tap in the house points to a whole-home system.
- Match the contaminant to the standard. Taste and odor alone: 42. A named health concern: 53 (or 58 for RO). Trace pharmaceuticals and unregulated chemicals: 401 as an extra layer. PFAS: 53 or 58, with PFOA/PFOS named.
- Verify the exact model in the certifier’s directory before you pay.
- Plan the maintenance before you buy. The CDC’s advice is to change filters according to the manufacturer’s recommendations.
If you are renovating the room the filter will live in, water is part of the larger healthy-home picture — see our complete guide to healthy home improvement for the layout, materials, and ventilation choices around it. complete guide to healthy home improvement
Frequently Asked Questions
Do I need a water filter if my tap water meets EPA standards?
Not necessarily. The CDC says that if your tap water does not contain harmful germs or chemicals, you may not need a filter. Many people buy a pitcher filter for taste alone — a legitimate reason, but not a health filter.
What is the difference between NSF 42 and NSF 53?
NSF/ANSI 42 covers aesthetic effects — chlorine, taste, and odor. NSF/ANSI 53 covers the reduction of a contaminant with a health effect. A filter can be certified to one, the other, or both, and the number is not a ranking — the numbers reflect the order in which the standards were developed.
Can a pitcher filter remove PFAS?
Some can, but only if that exact model is certified for PFAS reduction — the EPA advises checking the packaging for certification to NSF/ANSI 53 or NSF/ANSI 58 for PFAS reduction, and checking the certifier’s product directory if in doubt. As of April 2024, PFAS filter certifications focused on PFOA and PFOS. A pitcher that only claims NSF 42 has no verified PFAS claim at all.
Does reverse osmosis remove everything?
No. RO removes parasites, bacteria, and viruses, and some chemicals including lead, copper, chromium, chloride, and sodium, and may reduce others — but the CDC says to check the system’s label for the specific chemicals it removes. RO also produces reject water — a typical point-of-use system generates five gallons or more of reject water for every gallon of treated water. No filter removes every possible contaminant; NSF states that certification to a standard does not mean a system will reduce all possible contaminants.
How often should I change my filter cartridge?
Follow the manufacturer’s recommended schedule, and do not stretch it. The CDC advises changing filters according to the manufacturer’s recommendations, wearing gloves while you change them, and washing your hands afterward. The EPA warns that not replacing a filter by the manufacturer’s recommended schedule can increase your risk of exposure to PFAS.
Sources
Sources checked November 18, 2026. Photo: A filter pitcher on a kitchen table. HomeSpot HQ, via Flickr (CC BY 2.0).
- NSF, “NSF Standards for Water Treatment Systems”
- U.S. EPA, “Per- and Polyfluoroalkyl Substances (PFAS)”
- U.S. EPA, “Reducing PFAS in Your Drinking Water with a Home Filter” (fact sheet, April 2024)
- U.S. EPA, “CCR Information for Consumers”
- U.S. EPA, “Point-of-Use Reverse Osmosis Systems” (WaterSense)
- CDC, “About Choosing Home Water Filters”
- CDC, “About Home Water Treatment Systems”
- NSF drinking water treatment units directory
- WQA product finder

