On this page
- Quick Answer
- Why the Air Inside Your Home Deserves a Second Look
- Strategy 1: Source Control — Start Here, Because It Works Best
- Strategy 2: Ventilation — Let the Good Air In (When It Is Good)
- Strategy 3: Air Cleaners and Filtration — The Helpful Supplement
- The Invisible Risks: Radon and Carbon Monoxide
- What Doesn’t Help (or Helps Far Less Than Advertised)
- A Simple Weekend Plan
- Frequently Asked Questions
- Sources
Quick Answer
If you only do three things, do them in this order: first, remove or reduce the pollution sources in your home; second, bring in clean outdoor air; third, filter what is left. That is the U.S. Environmental Protection Agency’s whole framework in one sentence, and the order matters more than any gadget you can buy. A good air purifier helps, but it cannot rescue a home where a gas stove runs without a vent, a damp basement feeds mold, or radon seeps in untested.
Why the Air Inside Your Home Deserves a Second Look
Most of us spend the great majority of our time indoors, and most of that time at home. The EPA notes that since most people spend about 90% of their time indoors, mostly in their homes, much of their exposure to airborne pollutants happens in the home. That is not a reason to panic — but the air in your living room is shaped by things you can control: what you burn, what you bring in, how damp the place stays, and how fresh air moves through it.
Indoor air pollutants come in two broad kinds: particles and gases. Particles include dust, pollen, pet dander, mold spores, and fine soot from cooking or smoke. Gases include volatile organic compounds (VOCs) from paints, cleaners, and new furniture, plus carbon monoxide and radon — two gases you cannot see or smell.
Strategy 1: Source Control — Start Here, Because It Works Best
The EPA puts it plainly: usually the most effective way to improve indoor air quality is to eliminate individual sources of pollution or to reduce their emissions. It is also often cheaper than the alternatives, because bringing in more outdoor air can raise your heating and cooling bills. Before you shop for anything, walk through your home like a detective and look for the sources first.
Cooking smoke and combustion appliances
Cooking is the most common everyday source of indoor particles, and gas stoves add nitrogen dioxide and carbon monoxide to the mix. The single most useful habit is also the simplest: turn on the range hood every time you cook, and make sure it vents outdoors rather than recirculating air back into the kitchen. Local bathroom and kitchen fans that exhaust outdoors remove contaminants directly from the room and also increase the outdoor air ventilation rate.
Fuel-burning appliances — furnaces, water heaters, fireplaces, space heaters — deserve a yearly professional inspection. The EPA’s carbon monoxide guidance recommends having fuel-burning appliances inspected by a trained professional at the beginning of every heating season. A cracked heat exchanger or a blocked chimney is not something a filter can fix.
Tobacco smoke and candles
Secondhand smoke is one of the strongest indoor pollutants, and no filter makes a smoky room healthy. Keep smoking outdoors. Scented candles and incense are smaller sources, but they still release fine particles; use them briefly, with a window cracked or the fan running.
New furniture, paint, and cleaning products
New pressed-wood furniture, fresh paint, and strong cleaners release VOCs, and the smell of “new” is often the smell of those chemicals leaving the material. The EPA’s advice for short-term activities that generate high levels of pollutants — painting, paint stripping, cooking, sanding — is to ventilate as much as possible while you do them, and to do them outdoors when you can. When you can, choose low-VOC paints and unscented cleaners, and give a freshly painted room a few days to air out before sleeping in it.
Moisture: the source behind the mold
Mold does not grow because your house is dirty. It grows because something is wet. The EPA’s first rule of mold is simple: the key to mold control is moisture control. Fix the leak, dry the wet spot, and the mold problem usually shrinks with it. The EPA advises drying water-damaged areas and items within 24 to 48 hours to prevent mold growth — if wet or damp materials are dried within that window, in most cases mold will not grow.
Keep indoor relative humidity below 60 percent, ideally between 30 and 50 percent. A hygrometer tells you where you stand — the EPA describes one as a small, inexpensive instrument available at many hardware stores. If your home regularly reads above 60 percent, a dehumidifier in the dampest room is usually a better investment than another air purifier.
Strategy 2: Ventilation — Let the Good Air In (When It Is Good)
Once you have dealt with the sources you can remove, the next step is dilution: bring in outdoor air to thin out what is left.
In practice, ventilation in most homes comes from three routes: natural ventilation through open windows and doors, mechanical ventilation through fans and HVAC systems, and infiltration — air leaking in through cracks and joints. Most home heating and cooling systems do not mechanically bring fresh air into the house, so opening windows and running exhaust fans is how most homes get fresh air.
A few habits that make ventilation work for you:
- Run the bathroom fan during and after every shower, and let it run for 20 to 30 minutes afterward. It pulls out the steam before it condenses on walls and feeds mold.
- Open windows on opposite sides of the home when the weather allows, for cross-ventilation.
- Ventilate hardest during messy jobs. The EPA specifically recommends taking as many ventilation steps as possible while painting, stripping paint, cooking, or sanding.
- Check the outdoor air first. The EPA cautions that you should carefully evaluate using ventilation to reduce indoor pollutants where there may be outdoor sources of pollutants, such as smoke or refuse, nearby. On a wildfire-smoke day or a high-pollen day, close the windows and run a filter instead.
Strategy 3: Air Cleaners and Filtration — The Helpful Supplement
Here is where most people start, and where the EPA says you should finish. Filtration can be an effective supplement to source control and ventilation — not a replacement for them. No air cleaner or filter will eliminate all of the air pollutants in your home.
How to choose a portable air cleaner
Portable air cleaners, also called air purifiers, are designed to filter the air in a single room or area. Two numbers matter:
- CADR (Clean Air Delivery Rate). To filter particles, choose a portable air cleaner with a CADR large enough for the size of the room you will use it in; the higher the CADR, the more particles it can filter and the larger the area it can serve. The EPA’s sizing chart gives minimum CADRs of 65 cfm for a 100-square-foot room, 195 cfm for 300 square feet, and 325 cfm for 500 square feet, calculated for an 8-foot ceiling. A small unit in a big open-plan room is mostly decoration. Measure the room, then buy the CADR to match it.
- True HEPA for particles. HEPA stands for “high efficiency particulate air” filter, as officially defined by the U.S. Department of Energy. A HEPA filter can theoretically remove at least 99.97% of dust, pollen, mold, bacteria, and other airborne particles with a size of 0.3 microns — the hardest size for the filter to catch, so larger or smaller particles are trapped even more efficiently. Watch out for labels like “HEPA-like,” “HEPA-type,” or “HEPA-style.” Those are marketing words, not the DOE definition, and they do not guarantee the 99.97% figure.
- Activated carbon for gases. HEPA catches particles; it does not catch gases. To filter gases, choose a portable air cleaner with an activated carbon filter or another filter designed to remove gases. The EPA notes that the CADR rating system is for particles only, and that activated carbon filters can be effective provided a large amount of material is used in the filter. If cooking smells or chemical odors are your main complaint, carbon is the part that matters.
Where you put the cleaner matters too: the EPA suggests placing it in the room you spend the most time in, with airflow unobstructed, and keeping it away from curtains or anything that might block airflow. And the longer an air cleaner runs, the more air it filters — running it on low all day beats running it on high for an hour and then switching it off.
Your furnace filter: the MERV 13 question
Central furnace or HVAC filters are designed to filter air throughout a home, but they only work when the system is running — and most systems run less than 25% of the time during heating and cooling seasons. The EPA’s recommendation is to select a filter rated at least MERV 13, or as high as your system will accommodate. Filters with a MERV of 13 and above must demonstrate at least 50% removal efficiency for the smallest particles tested. Most systems can accommodate a MERV 13 filter without creating equipment problems, provided the filter is replaced frequently — but to be certain, consult a professional HVAC technician. All filters need regular replacement; a dirty, overloaded filter will not work well.
If you are thinking about the bigger picture of your home’s systems — how heating, cooling, ventilation, and smart devices fit together — our healthy home improvement guide walks through the whole-house view, and our healthy smart home guide covers how to choose and place devices room by room.
The Invisible Risks: Radon and Carbon Monoxide
Two of the most serious indoor air hazards are the ones you cannot see, smell, or filter away. They deserve their own section, because the fix for each is specific — and neither one is an air purifier.
Radon: test, because you cannot sense it
Radon is a naturally occurring radioactive gas that seeps into homes from the soil. The EPA recommends that homes be fixed if the radon level is 4 pCi/L (picocuries per liter) or more, and recommends that Americans consider fixing their home for radon levels between 2 pCi/L and 4 pCi/L, because there is no known safe level of exposure to radon. The average indoor radon concentration for America’s homes is about 1.3 pCi/L, and the EPA estimates radon is responsible for about 21,000 lung cancer deaths in the United States each year, making it the leading cause of lung cancer among non-smokers.
Testing is cheap and simple — short-term kits sit in your lowest lived-in level for a few days, and long-term kits measure over months. Every home should test, because the only way to know your number is to measure it. If your result is at or above 4 pCi/L, the fix is a mitigation system installed by a professional — not an air cleaner. The EPA does not recommend using air cleaners to reduce levels of radon and its decay products, because they only partially remove the decay products and do not diminish the amount of radon entering the home.
Carbon monoxide: alarms, not filters
Carbon monoxide (CO) is a colorless, odorless gas which at high levels can cause serious illness and death. No filter removes it. The protection is a CO alarm: the EPA advises placing a detector in a central location on every level of the home’s livable space (including the basement), near or inside each sleeping area, and inside the home near the door leading to an attached garage. If you are getting a single detector, place it near the sleeping areas and make certain the alarm is loud enough to wake you up. Test CO alarms monthly, and treat them as a back-up to proper installation, use, and maintenance of fuel-burning appliances — not a replacement for it.
What Doesn’t Help (or Helps Far Less Than Advertised)
This is the part most guides skip, and it is the part that saves you the most money.
Ozone generators
Ozone generators sold as air cleaners intentionally produce the gas ozone, and no federal government agency has approved these devices for use in occupied spaces. The EPA’s air cleaner guide carries a blunt note: avoid portable air cleaners and furnace/HVAC filters that intentionally produce ozone, because ozone is a lung irritant. At concentrations that do not exceed public health standards, ozone has little potential to remove indoor air contaminants. Some devices with electrostatic precipitators, ionizers, UV lights without adequate lamp coatings, and plasma air cleaners may also emit ozone. If a product’s main selling point is ozone, ionization, or “activated oxygen,” walk away.
Houseplants as air cleaners
There has been publicity suggesting that houseplants reduce levels of some chemicals in laboratory experiments, but there is currently no evidence that a reasonable number of houseplants remove significant quantities of pollutants in homes and offices. Plants are wonderful for mood — just do not buy twenty of them expecting your air quality numbers to move. And do not over-water them, because overly damp soil may promote the growth of microorganisms that can affect allergic individuals.
Air cleaners for mold
Portable air cleaners and furnace/HVAC filters do not solve mold problems. Mold is caused by a water or moisture problem in the building; to solve it, get rid of the source of the moisture and clean up the mold. A filter may catch some mold spores floating in the air, but it will not resolve the damp wall that keeps growing them.
A Simple Weekend Plan
If the whole guide feels like a lot, here is the honest minimum — a single weekend, in order:
- Saturday morning: Buy a radon test kit and a hygrometer. Put the radon kit in the lowest lived-in level and the hygrometer in the room that feels dampest. Check that every fuel-burning appliance has had its yearly inspection.
- Saturday afternoon: Walk the house for moisture. Look under sinks, behind the washing machine, and in the basement. Fix any drip, and dry anything wet within 24 to 48 hours.
- Sunday morning: Check your furnace filter. If it is gray and clogged, replace it — MERV 13 if your system can take it. Turn on the range hood and check whether it vents outdoors.
- Sunday afternoon: If you decide to buy a portable air cleaner, measure the room first, pick one with a true HEPA filter and a CADR that matches the room size, and add activated carbon if odors bother you. Skip anything that produces ozone.
- Ongoing: Test CO alarms monthly, run the bathroom fan after every shower, and keep indoor humidity between 30% and 50%.
Source control, ventilation, filtration — in that order — and a test for the one thing you cannot see.
Frequently Asked Questions
What is the single most effective way to improve indoor air quality?
Removing or reducing the sources of pollution — usually the most effective step, according to the EPA, and often the most cost-efficient one. Ventilation comes second, and air cleaners supplement both, not substitute for them.
Do I need an air purifier if I open my windows?
Often, no — or at least not yet. If the outdoor air is clean and you can ventilate well, opening windows and running exhaust fans may be enough for everyday pollutants. A purifier earns its place when outdoor air is poor (wildfire smoke, high pollen), when someone in the home has allergies or asthma, or when a source cannot be fully removed.
What size air purifier do I need for my room?
Use the CADR number on the box, matched to the room’s square footage. The EPA’s chart gives a minimum CADR of 195 cfm for a 300-square-foot room and 325 cfm for a 500-square-foot room, based on an 8-foot ceiling. Measure length times width and compare it with the maximum room size on the packaging.
Are ozone air purifiers safe?
No. The EPA advises against air cleaners that intentionally produce ozone in occupied spaces, and no federal agency has approved ozone generators for use there. Ozone is a lung irritant, and at levels that are safe to breathe it does little to clean the air. Choose a filter-based unit with true HEPA and activated carbon instead.
How do I know if my home has a radon problem?
The only way to know is to test. Radon has no smell and no color, and the EPA recommends that homes be fixed at 4 pCi/L or more and that homeowners consider fixing levels between 2 and 4 pCi/L. Short-term test kits are inexpensive and widely available; place one in the lowest level where people spend time, and if the result is high, confirm it and talk to a certified mitigation professional.
Sources
Sources checked November 18, 2026. Photo: A portable air purifier beside a sofa. Home Air Quality Guides, via Wikimedia Commons (CC BY-SA 2.0).
- U.S. EPA, “Improving Indoor Air Quality”
- U.S. EPA, “Guide to Air Cleaners in the Home” (2nd edition)
- U.S. EPA, “What is a HEPA filter?”
- U.S. EPA, “What is a MERV rating?”
- U.S. EPA, “What is EPA’s Action Level for Radon and What Does it Mean?”
- U.S. EPA, “A Brief Guide to Mold, Moisture and Your Home”
- U.S. EPA, “Protect Your Family and Yourself from Carbon Monoxide Poisoning”
- U.S. EPA, “Carbon Monoxide Alarms: Protect Your Family and Yourself”
- U.S. EPA, “Where should I place a carbon monoxide detector?”

