How to Read a Food Label in 60 Seconds

Sixty seconds, five checks: serving size, calories, the % Daily Value column (5% is low, 20% is high), the Added Sugars line, and the ingredient list, heaviest first.

The FDA's sample Nutrition Facts label showing serving size, calories, and percent Daily Value
Photo: The FDA's sample Nutrition Facts label showing serving size, calories, and percent Daily Value. See the Sources section of the article for the full credit.
On this page
  1. Quick Answer
  2. Check 1: The Serving Size — The Number Everything Else Depends On
  3. Check 2: Calories — Big, Bold, and Per Serving
  4. Check 3: The % Daily Value — The 5% / 20% Rule
  5. Check 4: Added Sugars vs. Total Sugars — Read the Smaller Line
  6. Check 5: The Ingredient List — Heaviest First
  7. What Changed on the Label
  8. Putting It Together: Comparing Two Boxes in the Aisle
  9. What the Label Does NOT Tell You
  10. Frequently Asked Questions
  11. Sources

Quick Answer

Read a food label in five checks, top to bottom: the serving size and how many servings are in the package; the calories; the % Daily Value column, using the rule that 5% or less is low and 20% or more is high; the “Includes Added Sugars” line under Total Sugars; and the ingredient list, which runs heaviest ingredient first. Sixty seconds is enough once you know the order — the label is the same shape on every package.

This article explains what labels say. It is not medical advice, and it does not recommend any product or diet. Questions about your own nutrition, a medical condition, or a restricted diet belong to a clinician or a registered dietitian.

Check 1: The Serving Size — The Number Everything Else Depends On

Start at the top: the number of servings in the package (servings per container) and the serving size. Serving sizes are standardized so similar foods are easy to compare, and are given in familiar units like cups or pieces, plus grams.

The part people get wrong most often: the serving size reflects the amount that people typically eat or drink. It is not a recommendation of how much you should eat or drink. Every number below it depends on that serving — all the nutrient amounts shown on the label, including the number of calories, refer to the size of the serving. Eat two servings and you get twice what the label shows: double the nutrients, the calories, and the %DVs. The FDA’s example: one serving of lasagna is 1 cup and 280 calories; two cups is 560 calories, with every nutrient and %DV doubled.

Check 2: Calories — Big, Bold, and Per Serving

The calories number is the biggest figure on the label, and that is deliberate: the updated label highlights “Calories,” “servings per container,” and the “Serving size” declaration by increasing the type size and placing the number of calories and the “Serving size” declaration in bold type. Calories provide a measure of how much energy you get from a serving of this food.

Two things to remember. First, the calories are per serving, not per package — one serving of lasagna is 280 calories, but the whole package is four servings, or 1,120 calories. Second, 2,000 calories a day is used as a general guide for nutrition advice; your own needs may be higher or lower.

Check 3: The % Daily Value — The 5% / 20% Rule

The % Daily Value (%DV) is the percentage of the Daily Value for each nutrient in a serving of the food, and it shows how much a nutrient in a serving contributes to a total daily diet. The Daily Values are reference amounts of nutrients to consume or not to exceed each day, based on a 2,000-calorie daily diet. You do not need to do any arithmetic — the label does the math for you, putting every nutrient on the same 0–100% scale for the day.

The FDA’s general guide to %DV is short enough to memorize: 5% DV or less of a nutrient per serving is considered low, and 20% DV or more is considered high. A soup at 37% DV for sodium is a high-sodium food — more than a third of a day’s sodium in one serving.

Here are the Daily Values behind the percentages — the amount a label means when it says 100% DV:

Nutrient Daily Value (100% DV) Goal
Total fat 78 g Less than
Saturated fat 20 g Less than
Sodium 2,300 mg Less than
Dietary fiber 28 g At least
Added sugars 50 g Less than

The “less than” and “at least” matter: saturated fat, sodium, and added sugars are upper limits to stay below, while dietary fiber is a lower limit to reach on most days.

One gap: trans fat and Total Sugars do not list a %DV on the Nutrition Facts label. For total sugars, no Daily Reference Value has been established because no recommendation has been made for the total amount to eat in a day. That is why sugars need their own check — the next one.

Check 4: Added Sugars vs. Total Sugars — Read the Smaller Line

Under Total Carbohydrate you will find Total Sugars, and directly beneath it, in smaller indented type, “Includes X g Added Sugars.” That little line is one of the biggest changes on the modern label: the updated format adds “Includes X g Added Sugars” directly beneath the listing for “Total Sugars.”

The two lines measure different things. Total Sugars includes sugars naturally present in many nutritious foods and beverages, such as sugar in milk and fruit, as well as any added sugars in the product. Added Sugars include sugars added during processing (such as sucrose or dextrose), foods packaged as sweeteners (such as table sugar), sugars from syrups and honey, and sugars from concentrated fruit or vegetable juices.

The word “Includes” tells you Added Sugars are part of the Total Sugars number. The FDA’s yogurt example: 15 g of Total Sugars, of which 7 g are Added Sugars and 8 g naturally occurring. A high Total Sugars number can mean mostly natural sugar — plain yogurt, fruit — or almost entirely added sugar. Only the smaller line tells you which. Unlike Total Sugars, Added Sugars has a Daily Value: 50 g per day on a 2,000-calorie diet, with a %DV on the label.

Check 5: The Ingredient List — Heaviest First

Below the Nutrition Facts box sits the ingredient list, and it follows a rule almost as simple as the 5%/20% rule. Ingredients required to be declared on the label of a food shall be listed by common or usual name in descending order of predominance by weight. The first ingredient weighs the most; the last weighs the least. Weight, not importance, sets the order.

That answers the question most shoppers are really asking — what is this food mostly made of? If sugar is the second ingredient, the product is mostly sugar after its main ingredient, whatever the front of the package says. Read the first three ingredients and you know most of the story.

One exception: the rule does not apply to ingredients at 2 percent or less by weight when they are grouped at the end after a statement such as “Contains 2 percent or less of…” So the tail of a long list may be out of order — the head is where the weight is.

The same close-reading habit works on other labels in the house. Our guide to reading a sunscreen label in 60 seconds uses the same five-check method on a sunscreen bottle, where the regulated claims are different but the discipline — find the standardized box, read it top to bottom, ignore the front-of-package promises — is exactly the same.

What Changed on the Label

If the label looks different from the one you remember from years ago, it is. The previous label was more than 20 years old when the changes were made. Larger manufacturers had to switch by January 1, 2020, and smaller ones by January 1, 2021. The main changes: calories, servings per container, and serving size got bigger and bolder; serving sizes were updated to match what people actually eat (ice cream went from 1/2 cup to 2/3 cup, soda from 8 ounces to 12 ounces, yogurt from 8 ounces down to 6 ounces); added sugars got their own line with grams and a %DV; vitamin D and potassium joined the required list, while vitamins A and C are no longer required because deficiencies are now rare; and the footnote now reads: “The % Daily Value tells you how much a nutrient in a serving of food contributes to a daily diet. 2,000 calories a day is used for general nutrition advice.”

Putting It Together: Comparing Two Boxes in the Aisle

Try it on two boxes of the same food: check the serving sizes match first, run the 5%/20% rule down the %DV column, read the Added Sugars line rather than just Total Sugars, and glance at the first three ingredients.

You do not have to give up a favorite food to eat a healthy diet. The label is a tool for trade-offs, not a verdict on any single food.

And the label is only one part of eating well at home. Once a food is in your kitchen, how you store it and handle it matters as much as what is printed on the box — our kitchen food safety guide covers that half of the story.

What the Label Does NOT Tell You

The label does not tell you whether a food is good or bad overall — it lists nutrients and does not add them up into a verdict, so the trade-offs are yours to make. It does not tell you how much of a nutrient you personally need: the Daily Values are reference amounts based on a 2,000-calorie daily diet, and your own calorie needs may be higher or lower.

Frequently Asked Questions

What does “% Daily Value” actually mean?

The % Daily Value (%DV) is the percentage of the Daily Value for each nutrient in a serving of the food, and it shows how much a nutrient in a serving contributes to a total daily diet. The Daily Values are reference amounts of nutrients to consume or not to exceed each day, based on a 2,000-calorie daily diet.

How do I know if a food is high or low in a nutrient?

Use the FDA’s general guide: 5% DV or less of a nutrient per serving is considered low, and 20% DV or more is considered high. More often, choose foods that are higher in %DV for dietary fiber, vitamin D, calcium, iron, and potassium, and lower in %DV for saturated fat, sodium, and added sugars.

What is the difference between Total Sugars and Added Sugars?

Total Sugars includes sugars naturally present in foods and beverages, such as sugar in milk and fruit, as well as any added sugars in the product. Added Sugars are sugars added during processing, foods packaged as sweeteners such as table sugar, sugars from syrups and honey, and sugars from concentrated fruit or vegetable juices. The word “Includes” before Added Sugars means the added sugars are part of the Total Sugars number. Added Sugars has a Daily Value of 50 g and a %DV on the label; Total Sugars has no Daily Value, because no recommendation has been made for the total amount to eat in a day.

If I eat the whole package, do I just double the numbers?

Only if the package contains two servings. All nutrient amounts on the label, including calories, refer to one serving, so multiply by the number of servings you actually eat — if you eat two servings, double the nutrient and calorie amounts, as well as the %DVs.

Why is the serving size bigger than what I would eat — or smaller?

Serving sizes must be based on the amounts of food and drink that people typically consume, not on how much they should consume. The serving size reflects the amount that people typically eat or drink. It is not a recommendation of how much you should eat or drink. Ice cream went from 1/2 cup to 2/3 cup, soda from 8 ounces to 12 ounces, and yogurt from 8 ounces down to 6 ounces, because recent food consumption data showed the old sizes no longer matched what people actually eat.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *